- Schaeffler (UK) Ltd - Final Clearance
- Kawneer (UK) Ltd - Final Clearance
- BBC Scotland - Dumbarton
- Adient Seating UK Ltd
- BBC Maida Vale - Phase 3
- July Engineering Collective
- Kawneer (UK) Ltd - Private Treaty
- Schaeffler (UK) Ltd
- BBC Scotland
- BBC Elstree
- Kawneer (UK) Ltd - Auction Sale
- DJS Engineering Ltd
- BBC Maida Vale - Phase 2
VIRTUAL / PHYSICAL VIEWING:
Please bring an acceptable form of photographic identification (UK Passport or UK Photographic Driving Licence), PPE including Safety Shoes will be required to gain access to the site. (No children under 16 years or animals will be allowed onto the sites)
Viewing: Tuesday 8th September 2026 - By prior appointment with the Auctioneers only
Lots located at: Unit 1 Mitcham Business Centre, Mitcham Road, Blackpool, Lancashire, FY4 4QN.
ON-LINE BIDDING:
1) Purchasers wishing to bid for any lot must first register on-line (www.ppauctions.com) and agree to abide by both the specific sale conditions (purchaser's terms) and the general terms & conditions.
2) All quantities, dimensions, descriptions & photographs given in the catalogue, placed on the bidding pages or quoted by the Auctioneer are approximate and for guidance only, and no warranties are given or implied.
3) Any bid (acceptable to the auctioneer) forms a legally binding contract and the purchaser is responsible for the lot or lots once confirmed by invoice from the Auctioneer. Lots marked '(Delayed Collection)' may be used by the vendor until the release date. N.B. Lots are not transferable.
4) VAT is payable at the current rate on all lots and on the Buyers Premium (Exported Items: Applicable VAT may be refunded on production of satisfactory shipping documents).
5) Buyers Premium of 18% plus VAT is payable on the bid price.
6) Timing: Lots will close at between 1 & 2 minute intervals starting 11.00am on Thursday 10th September. Any bids received on a lot within the last two minutes will extend the closing time by two minutes for that lot.
OTHER BIDDING METHODS:
Purchaser's unable to bid on-line may bid by the following methods:-
A. Proxy Bids - all bids must be submitted to the Auctioneers on our bid form (available on request / viewing day).
B. Telephone Bids - available by prior arrangement with the Auctioneers only (minimum £2,000.00 GBP).
N.B. Bidding by any of the above methods forms a legally binding contract whether or not the lots have been viewed and regardless of any descriptive errors. Buyers Premium is still payable.
PAYMENT:
1) Payment must be made in full within 3 Days upon receipt of invoice. A 20% deposit is required on delayed items. Invoices will be emailed within 3 working days of the final lot closing.
Payment can be made by the following:-
a] BACS / CHAPS / bank transfer payment (preferred method)
b] On-Line UK debit & credit cards only: £500 Limit (+3% admin fee)
Title of the goods remains with the vendors until cleared funds have been received.
REMOVAL:
N.B. GOODS MAY ONLY BE COLLECTED AFTER CLEARED FUNDS HAVE BEEN RECEIVED AND ON PRODUCTION OF THE ORIGINAL COLLECTION NOTE.
Clearance: All 'Non Delayed' lots must be removed between MONDAY 14th & FRIDAY 25th SEPTEMBER 2026 (12.00noon). Due to the nature of the site, lots must be removed by prior appointment only (at least 48 hours notice - Tel: 01778 590111). Dates for clearance are Weekdays only (Excluding Bank Holidays). Times for clearance are 9.30am to 4.30pm Monday to Thursday and 9.30am to 12.00Noon Friday.
Please Note: Where relevant risk assessments, method statements, removal plans, timing details, etc. must be supplied to the Auctioneers for their approval prior to any work commencing on site. Where removal of equipment involves structural work "making good" will be the purchasers responsibility (BTMG). Please Note: Certain machines may have to be removed by approved contractors only.
Loading: All Lots are deemed to be purchased 'where they are situated' and in 'the condition as viewed'. All Preparation / Dismantling / Slinging / Lifting / Transportation etc. of the equipment is the exclusive responsibility of the purchaser.
Personnel / Equipment: All personnel intending to operate lifting / moving equipment on site must first produce to the Peaker Pattinson supervisor - current UK operating licenses - current UK equipment certificates and proof of all relevant UK insurances. They will be expected to work to The Vendors, Peaker Pattinson (Auctioneers) Ltd and current Health & safety regulations and may be ordered off the site at any time for breach of these regulations.
Entech Engineering Ltd
On-Line Auction Sale (Thursday 10th September 2026)
| Description | Bids | Price | Time Left | |
|---|---|---|---|---|
|
|
Lot 151 DSZH hydraulic tube expander tool kit in case |
0 | £10.00 |
14h 22m
Ends at 14:02
|
|
|
Lot 152 Enhart Pop pneumatic riveter with grease gun |
0 | £10.00 |
14h 24m
Ends at 14:04
|
|
|
Lot 153 Cemp submersible pump |
0 | £10.00 |
14h 26m
Ends at 14:06
|
|
|
Lot 154 Hurco VM20i CNC VMC, Hurco Max control, 1170x510mm table, 20 tool ATC, s/n H-V2E0651 (2014) |
18 | £6,050.00 |
14h 28m
Ends at 14:08
|
|
|
Lot 155 18x18" CI surface plate |
0 | £10.00 |
14h 30m
Ends at 14:10
|
|
|
Lot 156 Qty various spanners, Allen keys, screwdrivers, hammers etc |
0 | £10.00 |
14h 31m
Ends at 14:11
|
|
|
Lot 157 Qty various clamping equipment |
0 | £10.00 |
14h 32m
Ends at 14:12
|
|
|
Lot 158 Sealey SA35 pneumatic belt sander |
0 | £10.00 |
14h 33m
Ends at 14:13
|
|
|
Lot 159 Qty ER32 machine collets |
0 | £10.00 |
14h 34m
Ends at 14:14
|
|
|
Lot 160 Qty various parallels |
0 | £10.00 |
14h 35m
Ends at 14:15
|
|
|
Lot 161 12x 40 taper tool holders & back stops |
1 | £10.00 |
14h 36m
Ends at 14:16
|
|
|
Lot 162 Qty various machine collets |
0 | £10.00 |
14h 37m
Ends at 14:17
|
|
|
Lot 163 Qty various machine collets |
0 | £10.00 |
14h 38m
Ends at 14:18
|
|
|
Lot 164 Qty HSS taps to 1 1/4" approx |
0 | £10.00 |
14h 39m
Ends at 14:19
|
|
|
Lot 165 Qty HSS taps to 2" approx |
0 | £10.00 |
14h 40m
Ends at 14:20
|
|
|
Lot 166 Qty various dies to 2" approx |
0 | £10.00 |
14h 41m
Ends at 14:21
|
|
|
Lot 167 Qty HSS taper shank drills to 1 1/4" approx |
0 | £10.00 |
14h 42m
Ends at 14:22
|
|
|
Lot 168 Qty HSS taper shank drills to 40mm approx |
0 | £10.00 |
14h 43m
Ends at 14:23
|
|
|
Lot 169 Qty HSS taper shank drills to 2 3/32" approx |
0 | £10.00 |
14h 44m
Ends at 14:24
|
|
|
Lot 170 Qty HSS taper shank drills to 19mm approx |
0 | £10.00 |
14h 45m
Ends at 14:25
|
|
|
Lot 171 Qty HSS taper shank drills to 1 9/32" approx |
0 | £10.00 |
14h 46m
Ends at 14:26
|
|
|
Lot 172 1830x780mm metal frame workbench (contents not included) |
0 | £10.00 |
14h 47m
Ends at 14:27
|
|
|
Lot 173 Hurco BMC 40AP CNC VMC, 1200x500mm table, 24 tool ATC, Hurco Ultimax 3 control, s/n L1SIDO578 (1991) |
1 | £10.00 |
14h 48m
Ends at 14:28
|
|
|
Lot 174 Sealey SA35 pneumatic belt sander & pneumatic polisher |
0 | £10.00 |
14h 49m
Ends at 14:29
|
|
|
Lot 175 Qty HSS taper / straight shank twist drills to 1" approx |
0 | £10.00 |
14h 50m
Ends at 14:30
|
|
|
Lot 176 Qty HSS taper / straight shank twist drills to 1/2" approx |
0 | £10.00 |
14h 51m
Ends at 14:31
|
|
|
Lot 177 Qty various parallels |
0 | £10.00 |
14h 52m
Ends at 14:32
|
|
|
Lot 178 18x 40 taper tool holders |
0 | £10.00 |
14h 53m
Ends at 14:33
|
|
|
Lot 179 Yamazaki VQC-20/40A CNC VMC, 850x550mm table, 30 tool ATC, Mazatrol CAM M-2 control, s/n 57336 (1984... |
1 | £10.00 |
14h 54m
Ends at 14:34
|
|
|
Lot 180 Qty HSS taper shank drills to 39mm approx |
0 | £10.00 |
14h 55m
Ends at 14:35
|
