Tel: +44 [0]1778 590111 Email: info@ppauctions.com
Log In / Register Menu

Atlas 1300FDA Fuel Depot bunded diesel dispensing...

This item was sold in one of our on-line Auctions / Sales.  We may have similar items available in our forthcoming Auctions, or if you have equipment to sell please contact us for free valuations, advice etc - Tel: 01778 590111 / Email: info@ppauctions.com or please get in touch with us via our contact page

Atlas 1300FDA Fuel Depot bunded diesel dispensing...

Description

Atlas 1300FDA Fuel Depot bunded diesel dispensing tank, Cube 56 dispenser, 1235ltr capacity - Lot located at: Washington, Tyne & Wear, NE37 1HB.

Auction - Penn Elcom Ltd

Equipment located at: Penn Elcom Ltd, Washington,Tyne & Wear.
Pressing

Yangli JH25-250 mechanical double crank open back press, 2500kN nominal force,430-550mm die set height, MCGS touch screen control, 2700x920mm bed, 2100x700mm upper die, 275mm stroke, SDKFLI light guards, s/n 345176 (2015)
Hanoul HNCP-80 mechanical press, 80 ton capacity, 130mm stroke, 60-90SPM, 350mm die height, 1000x600mm bolster area, 840mm work height, s/n 992825 (1999) (FE36)

Hanoul HNCP-60 press, 60 ton capacity, 100mm stroke, 60-90SPM, 300mm die height adjustment, light guards, 840x500mm bolster area, 800mm working height, s/n 002261 (2002) (FE16)

Hanoul HNCP-60 press, 60 ton capacity, 100mm stroke, 60-90SPM, 300mm die height adjustment, light guards, 840x500mm bolster area, 800mm working height, s/n 001171 (2001) (FE14)

Hanoul HCP-60 press, 60 ton capacity, 125mm stroke, 60-90SPM, 300mm die height adjustment, light guards, 840x500mm bed, 800mm working height, s/n 992826 (1999) (FE11)

Worcester 30ton mechanical inclinable C frame press, 24x18” bed, mechanical guards, adjustable stroke

Cressex 30ton mechanical inclinable C frame press, 27x20” bed, mechanical guards

 

Pressbraking

Durma (Axe & Status) AD-R25100 CNC downstroking pressbrake, 2550mm x 100ton capacity, 265mm stroke, Durma DU6000 control, Sick C4000 light guards, front support, segmented tooling, s/n 7312116375 (2011)

Durma (Axe & Status) AD-R2060 CNC downstroking pressbrake, 2050mm x 60ton capacity, Durma DU6000 control, Fiessler light guards, front support, segmented tooling, s/n 7301126665 (2012)

 

Machine Tools / Miscellaneous

Harrison M500 gap bed centre lathe, 250mm CH x 1500mm b.c., Sony LH51 DRO, 31-1600rpm, steady & 4 jaw chuck

Centre M3 turret mill, belt head, 1270x250mm table, powerfeed, 66-4540rpm, s/n 904170110 (2017)

Shuangyang 7125A surface grinder, 500x250mm mag chuck (2017)

Jones & Shipman 540 surface grinder, Eclipse 14x6” mag chuck, s/n BO75584

Interwood IMP hydraulic veneer / laminating press, 2550x1350mm bed, headted top & bottom platens, s/n 76 (1997)

Atlas 1300FDA Fuel Depot bunded diesel dispensing tank, Cube 56 dispenser, 1235ltr capacity.

 

Equipment located at: Penn Elcom Ltd, St Leonards-on-sea, East Sussex

Seyi SN2-110 double crank mechanical press, 110 ton, 110mm stroke, 45-90SPM, 350mm die height, 90mm slide adjustment, 1880x660mm bolster area (1998) (small crack in base of press - drilled)

Colly 2010 hydraulic Pressbrake, 200ton capacity, 3000mm long bed, 220kg/cm2 max operating pressure, 250mm stroke, Smartscan light guards, s/n 660

Ungerer 1500/2,50/17 roller leveller, 1500mm length, 2.5mm material thickness, 17 straightening rolls, 18.5kW

Richtmaschine leveller ungerer, 1500mm bale length, 3mm material thickness, 9 straightening rolls, 18kW (1980 – refurbished 2013)

Richtmaschine ungerer, 1520mm bale length, 3mm material thickness, 9 straightening rolls

Thermwood C40 CNC 3 axis router, 96x48" bed, single head, 8 turret, s/n C40187E0799 (dismantled)

2x Trumpf QuickGrind punch / tool grinders (1x unused).

Qty various size flight storage cases.