- Schaeffler (UK) Ltd - Final Clearance
- Kawneer (UK) Ltd - Final Clearance
- BBC Scotland - Dumbarton
- Adient Seating UK Ltd
- BBC Maida Vale - Phase 3
- July Engineering Collective
- Kawneer (UK) Ltd - Private Treaty
- Schaeffler (UK) Ltd
- BBC Scotland
- BBC Elstree
- Kawneer (UK) Ltd - Auction Sale
- DJS Engineering Ltd
- BBC Maida Vale - Phase 2
VIRTUAL / PHYSICAL VIEWING:
Please bring an acceptable form of photographic identification (UK Passport or UK Photographic Driving Licence), PPE including Safety Shoes will be required to gain access to the site. (No children under 16 years or animals will be allowed onto the sites)
Viewing: Tuesday 8th September 2026 - By prior appointment with the Auctioneers only
Lots located at: Unit 1 Mitcham Business Centre, Mitcham Road, Blackpool, Lancashire, FY4 4QN.
ON-LINE BIDDING:
1) Purchasers wishing to bid for any lot must first register on-line (www.ppauctions.com) and agree to abide by both the specific sale conditions (purchaser's terms) and the general terms & conditions.
2) All quantities, dimensions, descriptions & photographs given in the catalogue, placed on the bidding pages or quoted by the Auctioneer are approximate and for guidance only, and no warranties are given or implied.
3) Any bid (acceptable to the auctioneer) forms a legally binding contract and the purchaser is responsible for the lot or lots once confirmed by invoice from the Auctioneer. Lots marked '(Delayed Collection)' may be used by the vendor until the release date. N.B. Lots are not transferable.
4) VAT is payable at the current rate on all lots and on the Buyers Premium (Exported Items: Applicable VAT may be refunded on production of satisfactory shipping documents).
5) Buyers Premium of 18% plus VAT is payable on the bid price.
6) Timing: Lots will close at between 1 & 2 minute intervals starting 11.00am on Thursday 10th September. Any bids received on a lot within the last two minutes will extend the closing time by two minutes for that lot.
OTHER BIDDING METHODS:
Purchaser's unable to bid on-line may bid by the following methods:-
A. Proxy Bids - all bids must be submitted to the Auctioneers on our bid form (available on request / viewing day).
B. Telephone Bids - available by prior arrangement with the Auctioneers only (minimum £2,000.00 GBP).
N.B. Bidding by any of the above methods forms a legally binding contract whether or not the lots have been viewed and regardless of any descriptive errors. Buyers Premium is still payable.
PAYMENT:
1) Payment must be made in full within 3 Days upon receipt of invoice. A 20% deposit is required on delayed items. Invoices will be emailed within 3 working days of the final lot closing.
Payment can be made by the following:-
a] BACS / CHAPS / bank transfer payment (preferred method)
b] On-Line UK debit & credit cards only: £500 Limit (+3% admin fee)
Title of the goods remains with the vendors until cleared funds have been received.
REMOVAL:
N.B. GOODS MAY ONLY BE COLLECTED AFTER CLEARED FUNDS HAVE BEEN RECEIVED AND ON PRODUCTION OF THE ORIGINAL COLLECTION NOTE.
Clearance: All 'Non Delayed' lots must be removed between MONDAY 14th & FRIDAY 25th SEPTEMBER 2026 (12.00noon). Due to the nature of the site, lots must be removed by prior appointment only (at least 48 hours notice - Tel: 01778 590111). Dates for clearance are Weekdays only (Excluding Bank Holidays). Times for clearance are 9.30am to 4.30pm Monday to Thursday and 9.30am to 12.00Noon Friday.
Please Note: Where relevant risk assessments, method statements, removal plans, timing details, etc. must be supplied to the Auctioneers for their approval prior to any work commencing on site. Where removal of equipment involves structural work "making good" will be the purchasers responsibility (BTMG). Please Note: Certain machines may have to be removed by approved contractors only.
Loading: All Lots are deemed to be purchased 'where they are situated' and in 'the condition as viewed'. All Preparation / Dismantling / Slinging / Lifting / Transportation etc. of the equipment is the exclusive responsibility of the purchaser.
Personnel / Equipment: All personnel intending to operate lifting / moving equipment on site must first produce to the Peaker Pattinson supervisor - current UK operating licenses - current UK equipment certificates and proof of all relevant UK insurances. They will be expected to work to The Vendors, Peaker Pattinson (Auctioneers) Ltd and current Health & safety regulations and may be ordered off the site at any time for breach of these regulations.
Entech Engineering Ltd
On-Line Auction Sale (Thursday 10th September 2026)
| Description | Bids | Price | Time Left | |
|---|---|---|---|---|
|
|
Lot 181 Qty HSS taper reamers to 1" approx |
0 | £10.00 |
15h 2m
Ends at 14:36
|
|
|
Lot 182 Qty HSS end mills, slot drills to 1" approx |
0 | £10.00 |
15h 3m
Ends at 14:37
|
|
|
Lot 183 Qty HSS end mills, slot drills to 1" approx |
0 | £10.00 |
15h 4m
Ends at 14:38
|
|
|
Lot 184 Polstore multidrawer cabinets with wooden work top |
0 | £10.00 |
15h 5m
Ends at 14:39
|
|
|
Lot 185 Qty various clamping equipment |
0 | £10.00 |
15h 6m
Ends at 14:40
|
|
|
Lot 186 Qty various clamping equipment |
1 | £10.00 |
15h 7m
Ends at 14:41
|
|
|
Lot 187 Qty Walter, Kennedy etc tips |
1 | £10.00 |
15h 8m
Ends at 14:42
|
|
|
Lot 188 Qty HSS side & face milling cutters to 6" approx |
0 | £10.00 |
15h 9m
Ends at 14:43
|
|
|
Lot 189 Qty Hypreze oil finish stones (unused) |
0 | £10.00 |
15h 10m
Ends at 14:44
|
|
|
Lot 190 4x 40 taper tool holders, collets etc |
0 | £10.00 |
15h 11m
Ends at 14:45
|
|
|
Lot 191 27x 40 taper tool holders |
0 | £10.00 |
15h 12m
Ends at 14:46
|
|
|
Lot 192 2x twin monitor stands & 1x single monitor stand |
0 | £10.00 |
15h 13m
Ends at 14:47
|
|
|
Lot 193 Qty various coolants etc on pallet including: Maxway GHS68, IMD Kunar 3, IMD B60, Houghton Quench 3,... |
0 | £10.00 |
15h 14m
Ends at 14:48
|
|
|
Lot 194 205ltr part drum of PEM Caflon P4 Phenol Alkoxylate |
0 | £10.00 |
15h 16m
Ends at 14:50
|
|
|
Lot 195 Mazak VQC-15/40 CNC VMC, Mazatrol M-32 control, 900x410mm table, 16 tool ATC, s/n 00201 (1990) |
1 | £10.00 |
15h 18m
Ends at 14:52
|
|
|
Lot 196 Geradi 200mm heavy duty machine vice, 500mm long |
1 | £10.00 |
15h 20m
Ends at 14:54
|
|
|
Lot 197 Spinner U-1520 CNC 5 axis machining centre, Siemens Sinumerik 840D control, 920x540mm main table, 55... |
50 | £5,000.00 |
15h 22m
Ends at 14:56
|
|
|
Lot 198 2x Gerardi modular vices, jaws etc |
0 | £10.00 |
15h 24m
Ends at 14:58
|
|
|
Lot 199 Geradi 200mm heavy duty machine vice, 700mm long |
1 | £10.00 |
15h 26m
Ends at 15:00
|
|
|
Lot 200 Metric slip gauge set |
0 | £10.00 |
15h 28m
Ends at 15:02
|
|
|
Lot 201 Blum TC52 probe in case |
3 | £12.00 |
15h 30m
Ends at 15:04
|
|
|
Lot 202 Blum TC54-20 probe in case |
3 | £12.00 |
15h 32m
Ends at 15:06
|
|
|
Lot 203 ONA Datic D2060 CNC spark eroder, 550x350mm table, Datic S60 control, s/n 7501/9611 (1996) |
6 | £1,050.00 |
15h 34m
Ends at 15:08
|
|
|
Lot 204 Accutex AU-500iA CNC wire eroder, 520x400mm work area, coolant / filter, Accutex SD Master control,... |
17 | £3,000.00 |
15h 36m
Ends at 15:10
|
|
|
Lot 205 Charmilles Technologies RoboFil 2000 CNC wire eroder, pendant, Charmilles control, 560x450mm table,... |
0 | £10.00 |
15h 38m
Ends at 15:12
|
|
|
Lot 206 Shiang Yang SY-2535 EDM hole spark eroder, 630x300mm table, s/n 170511 (2017) |
11 | £720.00 |
15h 40m
Ends at 15:14
|
|
|
Lot 207 5x various stands / frames |
0 | £10.00 |
15h 42m
Ends at 15:16
|
|
|
Lot 208 3x fixed shelf storage racks, some with boards |
0 | £10.00 |
15h 44m
Ends at 15:18
|
|
|
Lot 209 8x4ft metal work table with Record No114 bench vice, 2x 80mm bench vices (contents not included) |
0 | £10.00 |
15h 45m
Ends at 15:19
|
|
|
Lot 210 Homemade shredding machine with TEC drive motor / gearbox |
2 | £11.00 |
15h 46m
Ends at 15:20
|
