- Biomet UK Ltd Phase 1
- Collins Aerospace
- September Collective Sale
- Biomet UK Healthcare Ltd
- 3M United Kingdom PLC
- Ninth Wave Audio PT
- Red Bee Media
- June Collective Sale
- Radius Aerospace UK Ltd - Final Clearance
- May Electronics / Broadcast Collective
- Polypipe (Plura Innovations Ltd) Auction
- May Engineering Collective
VIEWING:
Site Access: Please bring an acceptable form of photographic identification (UK Passport or UK Photographic Driving Licence), & PPE including Safety Shoes, Safety Glasses, Hi-Viz as these will be required to gain access to the site. (No children under 16 years or animals will be allowed onto the sites)
Virtual / Physical Viewing: Tuesday 15th October 2024 - BY PRIOR APPOINTMENT ONLY WITH THE AUCTIONEERS.
At: The Works, Waterton Industrial Estate, Bridgend, Mid Glamorgan, CF31 3XA, Wales.
ON-LINE BIDDING:
1) Purchasers wishing to bid for any lot must first register on-line (www.ppauctions.com) and agree to abide by both the specific sale conditions (purchaser's terms) and the general terms & conditions.
2) All quantities, dimensions, descriptions & photographs given in the catalogue, placed on the bidding pages or quoted by the Auctioneer are approximate and for guidance only, and no warranties are given or implied.
3) Any bid (acceptable to the auctioneer) forms a legally binding contract and the purchaser is responsible for the lot or lots once confirmed by invoice from the Auctioneer. Lots marked '(Delayed Collection)' may be used by the vendor until the release date. N.B. Lots are not transferable.
4) VAT is payable at the current rate on all lots and on the Buyers Premium (Exported Items: Applicable VAT may be refunded on production of satisfactory shipping documents).
5) Buyers Premium of 15.5% plus VAT is payable on the bid price.
6) Timing: Lots will close at between 1 & 2 minute intervals starting from 11.00am on Thursday 17th October 2024. Any bids received on a lot within the last two minutes will extend the closing time by two minutes for that lot.
OTHER BIDDING METHODS:
Purchaser's unable to bid on-line may bid by the following methods:-
A. Proxy Bids - all bids must be submitted to the Auctioneers on our bid form (available on request / viewing day).
B. Telephone Bids - available by prior arrangement with the Auctioneers only (minimum £2,000.00).
N.B. Bidding by any of the above methods forms a legally binding contract whether or not the lots have been viewed and regardless of any descriptive errors. Buyers Premium is still payable.
PAYMENT:
1) Payment must be made in full within 3 Days upon receipt of invoice. A 20% deposit is required on delayed items. Invoices will be emailed within 3 working days of the final lot closing.
Payment can be made by the following:-
a] BACS / CHAPS etc Bank Transfer Payment (preferred method)
b] On-Line Personal UK debit & credit cards only: £500 Invoice Limit (+2% admin fee)
Title of the goods remains with the vendors until cleared funds have been received.
REMOVAL:
N.B. GOODS MAY ONLY BE COLLECTED AFTER CLEARED FUNDS HAVE BEEN RECEIVED AND ON PRODUCTION OF THE ORIGINAL COLLECTION NOTE.
Clearance: All 'non delayed' lots must be removed between MONDAY 28th OCTOBER & FRIDAY 8th NOVEMBER 2024 (12.00noon). Due to the nature of the site, lots must be removed by prior appointment only (at least 48 hours notice - Tel: 01778 590111).
PLEASE NOTE: All machines need to be collected in a specific order, schedule to be agreed with the auctioneers.
Dates for clearance are Weekdays only (Excluding Bank Holidays). Times for clearance are 9.30am to 4.30pm Monday to Thursday and 9.30am to 12.00Noon Friday.
Please Note: Where relevant risk assessments, method statements, removal plans, timing details, etc. must be supplied to the Auctioneers for their approval prior to any work commencing on site. Where removal of equipment involves structural work "making good" will be the purchasers responsibility (BTMG). Please Note: Certain machines may have to be removed by approved contractors only.
Loading: All Lots are deemed to be purchased 'where they are situated' and in 'the condition as viewed'. All Preparation / Dismantling / Slinging / Lifting / Transportation etc. of the equipment is the exclusive responsibility of the purchaser. No containers can be loaded on site without 5 working days notice & prior written approval from the Auctioneers.
Personnel / Equipment: All personnel intending to operate lifting / moving equipment on site must first produce to the Peaker Pattinson supervisor - current UK operating licenses - current UK equipment certificates and proof of all relevant UK insurances. They will be expected to work to The Vendors, Peaker Pattinson (Auctioneers) Ltd and current Health & safety regulations and may be ordered off the site at any time for breach of these regulations.
Biomet UK Ltd Phase 1
On-Line Auction Sale (Thursday 17th October 2024)
COMPLETED
Location
Bridgend, Mid Glamorgan, Wales
Viewing Info
Virtual / Physical VIEWING: Tuesday 15th October 2024 - by appointment only
Bidding Info
Opens - Thursday 3rd October 2024
Closes - Thursday 17th October starting from 11am
Flysheet Availability
Catalogue Availability
Description
Over 200 lots of high quality CNC, Machine Tools, Laboratory / Inspection, Factory Plant & Equipment including:
CNC
Mazak Quick Turn Smooth 200M CNC turning centre, Mazatrol Smooth G control, tail stock, 12 tool turret, live tooling, tool setting probe, parts catcher, swarf conveyor (2018)
2x Mori Seiki NL2500 CNC twin spindle turning centres, 12 tool turret, live tooling, Mori Seiki MSX-850 & MSX-805II control, swarf conveyor (2004 & 2008)
2x Mori Seiki NL2000 CNC turning centres, 12 tool turret, live tooling, Mori Seiki MSX-850 & MSX-805II control, swarf conveyor (2004 & 2009)
2x Index R200 CNC turning & milling centres, full 5 axis, Siemens Sinumerik Index C200-4D CNC control, 80 tool ATC, high pressure coolant, swarf conveyor (2012 & 2013)
2x Index G300 CNC turning & milling centres, twin 12 tool turret, driven tooling, Siemens Sinumerik Index C200-4D CNC control, swarf conveyor (2007 & 2009)
Mori Seiki NV5000α1 CNC VMC, Mori Seiki MSX-501 control, 30 tool ATC, 1000x500mm table, swarf conveyor (2004)
MACHINE TOOLS / INSPECTION
Everising (Addison) H-360HA heavy duty automatic horizontal bandsaw, 360x360mm max cutting capacity (2012)
Morrisflex powered twin polishing wheel with linisher attachment
4x Morrisflex / RJH Powerfin 1100 double ended polishing spindles, independent power
Metallography Omega PO1 PMV008 polisher, 200mm dia (2012)
Vanco Flexiband 700 horizontal belt linisher
Imet Perfect 250 pull down saw on stand (2005)
2x Trumpf Trumark Station 5000 laser marking stations (2010)
Dukane 340 press thruster in soundproof chamber, Keyence LK-H087 laser sensor, Rainbow Medical touch screen, Dukane IQ controller on table
Taylor Hobson Amtek Talyrond 130 roundness & Cylindricity tester with equipment (2009)
Mitutoyo PJ303 profile projector, 310mm dia screen, 260x150mm table on bench
Qty various size Crown Windley etc granite surface tables to 920x920mm approx
Qty small tooling inc: turning tools, tips, toolholders, collets, driven tooling, chucks, machine vices, R200 & G300 tooling etc.
FACTORY PLANT / MISCELLANEOUS
Wheelabrator Ventus Vacublast bead blast cabinet with reclaim & extraction unit (2006)
Guyson Mediblast 1400+ System bead blast cabinet with reclaim & extraction unit (2010)
Vacublast International Ventus 92S salt blast cabinet, single head, 0.55kW (1995)
Wheelabrator Vaqua 92 salt blast cabinet, single head (2016)
3x Guyson Mediblast 1400 systems single head media blast cabinets with dust collectors (2016 & 2010)
Enerpac RC Series duo hydraulic bench press, foot pedal control on workbench, 800x700x1800mm H
WH Wilmat mobile manual hoist
1 bay Bito SP2 roller storage racking, multishelf, 3000x1900mm shelf size, 2500mm high
Qty various Bott etc multi drawer storage cabinets, tables, work benches, mobile tool chests, double sided mobile tool trollies, etc.