VIEWING:
Site access: Please bring an acceptable form of photographic identification (UK Passport or UK Driving Licence) as this is may be required to gain access to the site. (No children under 16 years or animals will be allowed on site
Viewing: The Works, Whitchurch Road, Shrewsbury, Shropshire, SY1 4DP - By appointment with the Auctioneers only
BIDDING:
1) A: Purchasers wishing to bid for any lot must first register on-line (www.ppauctions.com) and agree to abide by both the specific sale conditions (purchaser's notes) and the general terms & conditions.
or B: Purchasers wishing to bid for any lot must fill in the tender form provided (signing and supplying the relevant information on each page as well as completing the last page) Please Note: As this is an On-Line tender an email address MUST be provided in this information.
2) Any bid (acceptable to the auctioneer) forms a legally binding contract and all tender bids must be received by 12:00noon GMT - FRIDAY 27TH MAY 2022. N.B. Lots are not transferable.
3) VAT is payable at the current rate on all lots and on the Buyer's & On-Line Premium.
4) Buyers Premium and On-Line Premium of 15.5% plus VAT is payable in addition to the tendered price.
5) Payment must be made in full within 5 Days upon receipt of invoice.
Payment can be made by the following:-
a] BACS / CHAPS Payment (preferred method)
b] On-Line UK Debit & Credit cards Only: £500 Limit (+2% admin fee)
Title of the goods remains with the vendors until cleared funds have been received.
6) Please note that all bids must be submitted on-line through our website or in writing by post / fax on the tender form. No verbal bids will be considered.
7) All information supplied by the Auctioneer in promotional material, catalogues, etc. is provided in good faith but may not be correct. No liability is accepted by the Auctioneer or their Client's for incorrect information, and it is the responsibility of the purchaser to satisfy themselves by physical inspection with regard to: General description, measurement, location, age, general conditions, environmental or health and safety conditions, removal requirements, etc.
8) The final decision relating to confirmation of acceptance of offers is estimated to be taken within two weeks of the tender date.
9) The Auctioneers reserve the right to sell this lot prior to the Tender sale date.
Any bid is accepted on the above basis only and all terms are governed by English law.
REMOVAL:
The preferred / chosen bidder(s) will be required to agree to exact payment and removal schedules prior to acceptance of any bids / offers. Due to the nature of the site, lots must be removed by prior appointment only (at least 48 hours notice - Tel: 01778 590111). Dates for clearance are Weekdays only. Times for clearance are 9.30am to 4.30pm Monday to Thursday & 9.30am to 12.00Noon Friday.
Where relevant risk assessments, method statements, removal plans, timing details, etc. must be supplied to the Auctioneers for their approval prior to any work commencing on site.Where removal of equipment involves structural work "making good" will be the purchasers responsibility (BTMG).Please Note: Certain machines may have to be removed by approved contractors only.
Loading: All Lots are deemed to be purchased 'where they are situated' and in 'the condition as viewed'. All Preparation / Dismantling / Slinging / Lifting / Transportation etc. of the equipment is the exclusive responsibility of the purchaser.
Personnel / Equipment: All personnel intending to operate lifting / moving equipment on site must first produce to the Peaker Pattinson supervisor - current operating licenses - current equipment certificates and proof of all relevant insurances. They will be expected to work to The Vendors, Peaker Pattinson (Auctioneers) Ltd and current Health & safety regulations and may be ordered off the site at any time for breach of these regulations.
Collection: GOODS MAY ONLY BE COLLECTED AFTER CLEARED FUNDS HAVE BEEN RECEIVED.
Radius Aerospace UK Ltd
On-Line Tender Sale (TENDERS DUE: FRIDAY 27th MAY 2022 (12.00noon))
COMPLETED
Location
Shrewsbury, Shropshire
Viewing Info
By Appointment with the Auctioneers Only
Bidding Info
TENDERS DUE: FRIDAY 27th MAY 2022 (12.00noon)
[Unless Sold Prior]
Flysheet Availability
Catalogue Availability
Description
Mazak Integrex i-300S 7 axis CNC turning centre, twin chucks / head, Mazatrol Smooth X control, 72 tool ATC, Cromar swarf management system, Absolent A.Mist 10 air filtration unit, 12,000rpm max spindle speed, s/n 267716 (2015) - Please Note: The Auctioneers reserve the right to sell this lot prior to the Tender sale date.
STANDARD SPECIFICATION CAPACITY
Chuck size main spindle 10 ". Chuck size secondary spindle 10 "
Maximum swing 658 mm. Swing over cross slide 658 mm
Swing during Y-Axis process 658 mm. Maximum machining diameter 658 mm
Bar work capability main spindle (dependant on chuck system) 77 mm
Bar capacity is dependant on the chucking system
Bar work capability secondary spindle 77 mm. Maximum machining length 1,519 mm
Maximum support weight main spindle chuck work 450 kg
Maximum support weight main spindle shaft work 1,000 kg
Maximum support weight secondary spindle chuck work 400 kg
RMP600 radio probe
MAIN SPINDLE
Rotating speed maximum 4,000 min-¹. Rotating speed minimum 35 min-¹
Acceleration and deceleration time 3.8s. Through hole diameter 91 mm
Motor output (40% ED rating) 30.0 kW. Motor output (continuous rating) 22.0 kW
Maximum torque (40% ED rating) 724 Nm. Maximum torque (Continuous rating) 609 Nm
SECONDARY SPINDLE
Rotating speed maximum 4,000 min-¹. Rotating speed minimum 35 min-¹
Motor output (40% ED rating) 26.0 kW. Motor output continuous rating 22.0 kW
Maximum torque (40% ED rating) 500 Nm. Maximum torque (Continuous rating) 341 Nm
MILLING HEAD
Type Single spindle with ATC unit. Tool shank type HSK63 (72 pocket tool magazine)
Tool size (OD turning) 25 mm. Tool size (ID turning) 40 mm
Tool size (milling tool max diameter) 125 mm. Tool size (milling tool max length) 400 mm
90° indexing time 0.5 s
FEED AXES
Rapid feed rate X 50 m/min. Rapid feed rate Z 50 m/min
Rapid feed rate Y 40 m/min. Rapid feed rate W 30 m/min
Movement stroke X 615 mm. Movement stroke Z 1,585 mm
Movement stroke Y 260 mm. Movement stroke W 1,574 mm
OTHERS
Coolant tank capacity 550 L. Power requirement (continuous) 81.95 kVA
MACHINE DIMENSIONS
Height of centers 1,235mm. Length 4,910mm. Width 2,800mm. Height 2,720mm. Weight 15,500kg.